
Short-run standing seam
Standing seam panels up to 10 feet, formed in the shop for bay windows, dormers, porch roofs, and other small spans. Available in copper or painted steel. We don't run full-length roof panels.
Shop work


Custom trim
Ridge, rake, valley, drip edge, sidewall, and siding clips. Dimensions below are inches. An asterisk means confirm the pitch or the companion part when you order. Codes marked X take a size from the table. Maximum trim length is 10 feet.
RR8b
180° pitch-to-pitch, 1" open hem. Specify roof pitch. Use with Z bar.
ZB
ZB1 1", ZB1121 1½", ZB134 1¾", ZB2 2". Pre-cut lengths available as ZBARPC.
RCF
RCF2, RCF1.5, RCF3, and RCF4. 1" seam height, 1" open hem, ½" closed hem, 135°. Use with the rake receiver.
RAKEREC
Painted side out, ½" closed hem. Pairs with the residential rake.
RRT3
4" legs, 1" open hem, ½" closed hem. Use with Z bar.
RCF
8" profile with 112° and 135° breaks, 1" open hem, ½" closed hem. Use with Z bar.
VF
VF3 at 1" seam height and VF3b at 2". 135° to the pitch, 90° break. Use with a cleat. Specify roof pitch.
CLEAT
1" and ½" legs, 45° and 135°, painted side noted on the sheet.
VF
VF4 at 1" seam height and V43b at 2". 90° and 135° breaks. Specify roof pitch.
SWT3
4" and 5" legs, 90° plus pitch, 1" open hem. Specify roof pitch or 90°.
TF3
8" × 8", 1" open hem. Specify both roof pitches. Use with Z bar.
DLME1
4" face, 135° break, ½" closed hem. Specify roof pitch.
SPC
1" legs with a ¾" open hem.
Dishes and antennas


Architectural metal




903-353-0920·2101 E US Hwy 80, White Oak, TX 75693